Standard terms & conditions for RAI Exhibitor Services

Part I - General

Part II - Specific Products

Client: every natural or legal person with whom RAI or a third party has entered into an agreement under which the client is entitled to participate as such in the Event and can place Orders in the Webshop;

Connection: the connection between the Mobile Device and the Wifi Access Point;

Contract: a contract between RAI or any of its subsidiaries and a Client for the supply of Products;

Convention Centre: the RAI Amsterdam Convention Centre belonging to RAI;

Event: a trade show, exhibition or other event organised in the Convention Centre by or in cooperation with RAI or by a third party;

Exhibitor Services: all Products offered by RAI in the Webshop to Clients;

Login code: depending on the version of the RAI Wifi service purchased by the Client; the alphanumeric code with which the Client gains access to the paid RAI Wifi service (Premium version) or the combination of SSID and PSK Code (Customized version);

Mobile Device: A mobile phone, tablet, laptop or other device that is technically suitable for making a Connection;

Order: an order from a Client as referred to in article 4.2 of these Terms and Conditions;

Parties: RAI and the Client;

Period of Use or Usage Period: depending on the version of the RAI Wifi service: for the duration of the Event (Customized) or per day (Premium);

Product: a product, good, service or a combination thereof, which RAI has agreed to provide to the Client (whether or not through an intermediary or a Supplier);

RAI: RAI Amsterdam B.V., which has its registered office at Europaplein 24, 1078 GZ, Amsterdam, The Netherlands, registered in the trade register of the Chambre of Commerce under number 92449174;

RAI Wifi service: the service where RAI offers the Client wireless broadband internet access via a Wifi connection within the Convention Centre. This service is a Product;

Space or Stand: the space or stand in the Convention Centre as specified in the Contract;

Stand Construction: design and construction of the stand, such as uniform, modular, and custom stand construction (Design & Build);

Supplier: the supplier engaged by RAI for the delivery of Products;

Terms and Conditions: these standard terms and conditions which apply to the delivery by RAI of Exhibitor Services;

Webshop: the virtual ‘shop’ which can be found in the RAI Exhibitor portal; and

Wifi Access Point: a radio access point for the RAI Wifi service that is made available by RAI at a physical location in the Convention Centre.

These Terms and Conditions apply to all offers, requests and Contracts pertaining to the Products. Deviations from and/or additions to these Terms and Conditions will be valid only if they have been expressly agreed in writing by RAI.

The applicability of the standard terms and conditions of other parties, including those of the Client, is expressly excluded.

RAI reserves the right to amend these Terms and Conditions unilaterally.

The Terms and Conditions can be found on RAI’s website (www.rai.nl) and a copy will provide upon request, without charge.

RAI will provide Clients with personal login data for the Webshop. Such data is personal and may only be used by the Client, which shall guarantee confidentiality.

The Client will be responsible and liable for all Orders placed by using the Client’s login data.

With his personal login data, the Client can access a personal web page in the Webshop containing information in respect of the Client. The Client will verify this information and will notify RAI forthwith if any of the information is incorrect.

All offers from RAI, whether in writing, by email or electronically (in the Webshop), are without obligation.

Orders for Products are placed by the Client in accordance with RAI specifications. The Client guarantees that any measurements, requirements, specifications and other data provided to RAI by him or his behalf are correct and complete. RAI will not be liable for any incorrect pricing, illustrations, drawings and statements of size and weight in confirmations to the extent these are based on errors or incorrect information provided by the Client.

Clients may place Orders to RAI in the Webshop or in writing or email.

A Contract is confirmed when RAI confirms the Order to the Client in writing or by email and without reservation. A Contract is not (yet) confirmed by the mere confirmation by RAI of receipt of a message from the Client.

Clients must specify in each Order the Product, the number, the Event, the period of the Event during which the Client wishes to have the Products and any other requirements.

Before sending confirmation of an Order, RAI may verify the validity of the Order and/or request further information or specification form the Client.

RAI may decide not to provide the requested Products or to offer alternative Products if opportune.

RAI may request the Client to provide a security deposit or bank guarantee prior to confirming of an Order. RAI’s claims against the Client may be set off by RAI against such deposit or bank guarantee.

Client may not wholly or partly transfer any rights under the Contract to third parties without the express prior written consent of RAI.

When confirming the Order, RAI will confirm to the Client the prices of delivery and, to the extent applicable, the installation of the Products. After confirmation, prices may be altered by RAI only after it has informed the Client. All prices are exclusive of value-added tax (VAT) and other government levies, which will be borne by the Client.

The financial consequences of amendment of an Order between the date of confirmation of the Order and the delivery and/or installation of the Products will be borne by the Client.

For Products ordered as from 5 days before the first Event day, a late fee of 20 % will be charged. This does not include catering, parking and waste removal Products.

Unless agreed otherwise in writing, the date listed in the confirmation of an Order serves as the date of delivery and/or installation of the Products. If the date of delivery and/or installation is exceeded, this will not constitute default on the part of RAI, in case the delivery and/or installation takes place within such reasonable time, as RAI and the Client determine together. If a delivery and/or installation date is exceeded, such will not entitle the Client the termination of the Contract or damages.

The term indicated in the confirmation of the Order will apply only if all necessary data are in the possession of RAI and the payment has been made (where this must be made together with the Order) or the requested security has been provided.

A Product will be deemed to have been delivered and accepted by the Client after RAI has confirmed to the Client of correct delivery and/or installation and:

• the Client has approved or accepted the Product; or
• 24 hours have expired since such confirmation; or
• the Client has started to use the Product.

Immaterial imperfections in the Product which can be repaired and which do not impair the functioning of the Product, do not give right to suspend payment or to claim compensation, subject to the proviso that the Client will be entitled to repair the imperfection.

If a Product is accepted by the Client, this will discharge RAI from all liability for imperfections which the Client could reasonably be expected to have discovered.

The risk in relation to a Product passes to the Client when the Client is deemed to have accepted it in accordance with this article.

The Client must accept the Products at the time specified in the Contract.

Unless expressly provided otherwise in Part II of these Terms and Conditions or in the Contract, the following applies in case of (partial) cancellation of a Contract:

Notice of cancellation of a Contract must be given to RAI in writing or by email;

The Client may cancel all or part of a Contract until the 14th working day before the first build-up day of the Event. Client shall only be obliged to pay RAI any reasonable costs incurred by or on behalf of RAI;

If a Client cancels a Contract on or after the 14^th but before the 6^th working day before the first build-up day of an Event, he will owe a cancellation fee of 50% of the agreed price;

In the event of cancellation of a Contract on or after the 6^th working day before the first build-up day of an Event, the Client will owe 100% of the agreed price.

The Contract will end upon the expiry of the period specified in the Contract.

RAI may suspend performance of its obligations under the Contract or terminate the Contract in whole or in part, without prejudice to the right of RAI to claim compensation for its costs, interest and other damage in the event of:

a breach of Contract on the part of the Client or if it is foreseeable that the Client will fail to fulfil any of its obligations;

bankruptcy, suspension of payments, seizure of assets or termination of the business of the Client.

If, before the start of the Event, the Client has not paid all amounts owed to RAI or has otherwise failed to fulfil his obligations, RAI may terminate the Contract unilaterally, without prejudice to the right to claim damages.

In so far as a Product is delivered and/or installed with a view to transferring ownership thereof to the Client, RAI reserves title to the Product until the Client has fulfilled all his obligations. In the event of default by the Client, RAI may exercise the reservation of title to the Product

If the Client fails to fulfil his obligations or there are good grounds for fearing that this will happen, RAI may reclaim the Product. In such case, the Client must fully cooperate, subject to payment of a penalty of € 10,000.00 for each day that the breach lasts.

RAI shall always be entitled to inspect the condition and manner of use of rented Products. In view hereof, the Client should allow RAI access to the Product upon first request.

The Client may not (i) integrate a Product into an item of property belonging to the Client (ii) mix a Product with its own property (iii) transform a Product or (iv) limit the right of title of RAI to rented Products in any way.

The Client hereby expressly accepts that ownership of the Products which it rents from RAI shall remain vested in the RAI. Client will use the Products only for the purpose for which the Products are intended.

The Client shall guarantee correct return to RAI of any rented Products, save for normal wear and tear.

The Client shall ensure that the delivery and/or installation of a Product by RAI is possible during the RAI’s working hours and in conditions that comply with the applicable safety requirements and other government regulations.

The Client shall ensure that the requisite approvals (such as licences and exemptions) and the necessary specifications and other data are available to RAI on time.

The costs of energy and power which are used by RAI and the approvals obtained for the delivery and/or installation of a Product will be borne by the Client.

The Client shall ensure that any work (e.g. structural work) to be carried out by third parties and any materials to be supplied and/or other activities to be performed other than by RAI is carried out on time and in such a way that the delivery and/or installation of a Product is not delayed. In the event of delay, the Client shall immediately notify RAI in writing.

The Client shall ensure that adequate and safe auxiliary equipment is available on time for the movement of heavy components of a Product and for the accessibility and suitability of the place where work on the Product is to be carried out.

The Client shall bear the risk of, at least, the following:

• damage to and loss of things such as materials, parts or tools which have been supplied by RAI and are under his supervision;
• damage caused by defects or the unsuitability of things provided by him or prescribed by him and for the late delivery of such things;
• damage caused by defects in designs, drawings, calculations, specifications, structures and/or implementing rules supplied by or on behalf of the Client;
• damage caused by the defective delivery and/or installation of a Product which is attributable to auxiliary staff engaged at the request of the Client or on his behalf; and
• Damage which is attributable to be the defective performance of work and unlawful acts of contractors (and their auxiliary staff) engaged by the Client.

Clients shall allow Suppliers to put up their name board when is installing a Product.

The Client may not have work unconnected with the Contract carried out by a Supplier

The Client shall use the Products only for the purpose for which they are intended.

A Client who rents or otherwise uses Products belonging to RAI must treat these Products with due care.

The Products will be at the expense and risk of the Client from the moment of delivery and/or installation until the moment when they are once again in the actual possession of RAI.

If a Product is lost, stolen or damaged, the Client shall report this to RAI in writing without delay but in any event within 24 hours. Theft or loss of Products must reported to the police by the Client within 24 hours. The Client shall reimburse the loss or damages at the new replacement value of the Product and reimburse the consequential damages incurred in connection with the repair of the Product. The Client shall take out adequate insurance against this risk.

If Products are installed at the Stand at the Client’s request, the Client will be responsible for these Products from the moment of installation

If a Product is rented, the Client shall keep it adequately insured at the new replacement value. The Client shall produce the insurance certificate for inspection at the first request of RAI.

If a Product is rented:

• RAI may require the Client to provide additional security in accordance with the provisions of article 4.8;
• the Client shall indemnify RAI against all damages caused by the Product, whether from inexpert and/or incorrect use or otherwise.

RAI shall ensure that the Products fulfil reasonable quality criteria. If safety requirements apply in respect of the Products, RAI shall ensure that the Products comply with these safety requirements.

RAI undertakes to use qualified staff for the performance of the Contract.

All applicable safety regulations will be observed by RAI in the performance of the Contract.

Where necessary, RAI will instruct the person designated by the Client on how to operate the Product. Time and place of such instruction will be determined in good consultation with the Client.

RAI will be liable for loss or damage only if this is due to its intent or gross negligence.

RAI’s liability to pay damages will always be limited to the amount of the payment made under RAI’s insurance or the amount paid by the Client under the Contract.

RAI will never be liable for consequential damages.

The right of the Client to claim damages or repair of goods will lapse one year after the date on which the Client determines or – if earlier – could reasonably have determined the extent of his loss or damage.

Modifications and/or repairs to a Product may only be carried out by RAI or a third party after RAI’s written consent. Defects should be reported immediately in writing to RAI.

All intellectual property rights to the Products, including but not limited to software, hardware or other materials, will be vested exclusively with RAI. The Client will obtain only the rights of use expressly set out in the Contract and these Terms and Conditions. The Client shall not reproduce, dispose of, publicise or make copies of the software, hardware or other materials belonging with a Product, except for back-up purposes. Client is required to destroy copies made for back-up purposes, at the end of the Event.

The software, hardware or other materials belonging to a Product may contain or comprise confidential information belonging to RAI. The Client undertakes to keep such information confidential and allow use only for the purpose for which it is intended.

The Client is not permitted to remove or alter any identifying mark on Products, such as identification numbers and nameplates, concerning copyright, trademarks, trade names or other intellectual or industrial property rights in the software, hardware or materials belonging with a Product.

Every copy for back-up purposes should contain the same copyright and trademark identification as the original version. If a temporary right of use has been granted, copies should be destroyed upon termination of the right.

The Client shall indemnify RAI against all claims which third parties may enforce against RAI for a breach of one or more of the provisions of this article (article 16).

The Client is must inspect the Product upon delivery for conformity.

If the Client discovers defects in the Product or has complaints about the Product, the Client shall report this to RAI immediately in writing or by email.

If the Client and/or a third party engaged by him has used the Product carelessly, the Client will under no circumstances be entitled to compensation for his loss or damage.

A complaints about a Product must be filled no later than the close of the Event.

A complaint about an invoice should be reported in writing or by email to RAI within 14 days of the date of the invoice.

The Client shall return Products to RAI on the date specified in the Contract and in the same condition in which he received them, save for normal wear and tear.

If the Client has not returned Products on time, the Client will be deemed to be in default subject to payment by the Client to RAI of a fine equal to twice the price or hire charge for the Product and damages.

The Client may not allow another person to use a Product or sublet a Product without the prior written consent of RAI.

If the Client has allowed another person to use or sublet a Product, the Client will then owe RAI compensation equal to twice the price or hire charge applicable under the Contract for each day that this situation lasts.

The Client is not allowed to resell Products to third parties, unless the Client has received prior written consent from RAI.

RAI will send invoices to Clients no later than 4 weeks before the start of the build-up of the Event. In such case a payment term of 21 days shall apply. Products ordered later must be paid forthwith as all payments owed for Products must have been received by RAI at the latest by the start of the build-up of the Event.

In case RAI does not receive the full payment in time, the Contract will be terminated and the Product(s) not delivered. RAI reserves the right to invoice the Client the total amount of the Contract plus damages.

Any additional Orders, changes to Products or extra costs of using Products during the Event will be charged by RAI after the close of the Event and should be paid after receipt of the invoice within the payment term stipulated on the invoice.

If the Client fails to fulfil its payment obligation, RAI reserves the right to suspend performance of all its obligations under the Contract until such time as full payment has been received, without prejudice to the provisions of article 8.

When entering into a Contract the Client will receive from RAI a purchase order PO (purchase order) number to be specified on the invoice. When making payments the Client should always quote the PO number.

After the expiry of the payment term, the Client will owe not only the invoice amount but also default interest of 2 % a month, increased by the value added tax (VAT) and other costs and damages.

The Client will never be entitled to suspend and/or set off his payment obligations.

Dutch law will apply to all offers of RAI and to every Contract. The applicability of the Vienna Sales Convention (CISG) 1980 is expressly excluded.

RAI will decide in all cases for which these Terms and Conditions make no provision or in which they are deemed unclear.

If and to the extent that any provision of these Terms and Conditions is null and void or is avoided, the other provisions of these Terms and Conditions will remain in full force and effect. In such case, RAI will replace the provision with one that is of the tenor of the former provision.

Any disputes that may arise between RAI and the Client will be decided by the competent court in Amsterdam, regardless of the nature of the dispute, the amount of the claims and the place of residence or business of the Client, without prejudice to the right of RAI to refer any dispute to the court competent by law or under any convention.

Mansveld Expotech (in this part A to be referred to as the Supplier) has been exclusively appointed by RAI to connect stands to the power supply grid of the Convention Centre (230/400V at 50 Hz). Clients are not permitted to foresee in any other form of power supply, for example by using generators. All electrical installations should comply with the regulations set out in the most recent version of Netherlands standards NEN-1010, NEN8020-20, NEN-3111, NEN-EN 50110 and NEN3140. Before use, all Stand installations should be certified by the Supplier according NEN 1010-6.

For technical reasons it may be necessary for one or more Stands to be connected to a single switch box or for a Stand to be connected to the switch and distribution box of an adjacent Stand. In that case the Client is not permitted to switch on or off the connection of one of the adjacent Stands.

Every switch and distribution box must have a main on/off switch, every stand has its own mains connection. Only the Supplier responsibility may connect third parties by means of a distribution group (electric circuits feeding one or more distribution devices). To ensure responsible party, the Supplier shall be solely responsible for temporary power connections in the Convention Centre and the supply of all mains connections (distribution groups) in the power circuit.

The time between successive NEN 3140 inspections of a switch and distribution box is no more than one year maximum. A sticker indicating who performed the inspections as well as the expiration/validity date, must be present on the switch and distribution box.

The Client must instruct the Supplier, regarding the required power supply and any facilities no later than 28 days before the first build-up day of the Event and to provide a drawing of the Stand showing its location and the desired positions of the connection. The Client should also indicate if there is a raised floor and/or storage room present on the Stand and show its location in the drawing.

Daytime power is switched on from half an hour before the start of the Event until half an hour after the close of the Event in the case of consumer events and from 1 hour before until 2 hours after the Event in the case of trade event. Clients may request continuous power for the use of computer equipment, a refrigerator and/or security equipment at the Stand. The Stand lighting may not be connected to the continuous power supply; it has to be connected to the daytime power mandatory. For safety reasons the power supply is shut off on the last day of the Event immediately after the Event closes.

Client installations must be carried out by a qualified electrician. If, in the opinion of the Supplier, the electrical installation of the Client is defective or otherwise unsound, the Supplier may withhold power supply from the Client. Upon request the installing qualified electrician must provide the following information to RAI:

• registered SEI/REI recognition;
• in case technicians are employed, registered designation policies in accordance with electrical laws and regulations as defined in NEN 3140, NEN 1010 and NEN 8020-20;
• electro technical diplomas of the electricians;
• inspection certificates of all electrical facilities, distribution boxes and cabling.

Trusses, aluminium shell scheme walls and steel constructions must be earthed if an electrical installation is present in the immediate vicinity. A potential equalization (earthing) is carried by a separate wire connected as close as possible to/on the earthing point of the switch and distribution box.

Cables under floors must have at least a core diameter of 2.5 mm² and must consist of one length, without interruption. All electrical connections must be properly protected. Welds must be made with wire nuts or industrial terminals and additional protection through a junction box. It is not allowed to hide welds behind walls and under floors. Power lines should be placed at a sufficient distance from water, drainage and gas pipes, ducts that are exposed must be properly protected to damage.

The earth leakage circuit breaker must have classification A (AC is not permitted).

Electrical Stand installations must be equipped with jacket cables with a minimum cross section of 2.5 mm² or equivalent, using thinner mantle conduit for power supply lines to the sockets is strictly prohibited. Exceptions are the power lines for lighting, these can be carried out with a cross section of 1.5 mm² provided that the connected load does not exceed 2kW (except factory-fitted/original cables to fixtures, etc.). The final group should be protected accordingly.

An electrical distribution through a splitter is not allowed. Also looping over lengths of more than ten meters by using multiple power extension leads, for infrastructural Stand installation, is not allowed.

The installation should consist of sufficient end groups that are evenly distributed. Each end group should have the correct fuse or circuit breaker and each end group needs to have an earth leakage circuit breaker with an operation current of 30 mA.

Motors must be equipped with a thermal safety switch. Engines with a power greater than 3 kW should also have a switch module, for which the starting current does not exceed three times the nominal current with a maximum of 180 A.

An early-bird booking rate is applied until 28 days before the first day of the Event. Afterwards the rate increases by 25 %. As of 5 days before the first Event day a late fee of 20 % will be charged.

The Supplier shall undertake to repair, without charge, defects in Products it has delivered, including installation and connection.

This obligation is limited to defects which the Client could not reasonably be expected to have seen at the time of the completion of the Product, including installation and connection, and which occur in normal operating conditions and when the Product is used correctly. It does not extend to defects which are a consequence of insufficient maintenance by the Client, changes made without the written consent of the Supplier or repairs made by the Client or for normal wear and tear for which the Client is liable.

In order to be able to invoke the rights resulting from this article, the Client must:

• immediately inform Supplier in writing of any defects discovered;
• show the Supplier that the defects are attributable to the less good qualities or defective execution of the Product or – if and in so far as the Product was designed by the Supplier – are a direct consequence of a fault imputable to the Supplier;
• cooperate with the Supplier in order to enable the Supplier to repair the defects within a reasonable period.

If, in the opinion of the Supplier, the costs of repair are disproportionate, the Client will be entitled to reasonable compensation.

All damages must be reported to RAI by the Client in writing immediately after being noticed, and certainly within 8 hours and before the breakdown of the Event. Also complaints about incorrect or inferior deliveries and invoices must be reported by the Client in writing immediately after being noticed (within 8 hours). The written observation must be accurate and in any case contain the nature and cause of the complaints. All complaints that are not reported within 8 hours are not considered.

Settlement for changes in the amount of work will take place:

• in the event of changes to the specifications (i.e. changes to the specifications, the Product or the conditions of execution of the Product);
• in the case of changes to provisional budgets and offset table and/or estimated quantities;
• in the cases referred to in these Terms and Conditions.

Additional work should be paid for by the Client in accordance with the invoice.

If the work and hence the chargeable amount are reduced, the deduction will be made as a lump sum at the time of final settlement.

The absence of a written instruction for additional work does not affect the Supplier’s entitlement to payment for such work.

Mansveld Expotech Infra (in this part B to be referred to as the Supplier) has been exclusively appointed by RAI to install and suspend truss and rigging systems in the Convention Centre. As such, all trusses and rigging systems must be executed by the Supplier and certified by RAI. If the system does not comply with the specified requirements, RAI or the Supplier can shut-down the work.

The articles 24 and 25, as provided for in Part II-A, will apply mutatis mutandis to a Contract for the suspension of truss and rigging systems.

When designing a truss and rigging system the Client must adhere to:

• The maximum floor and/or roof load capacity of the venue and the points from which the system can or cannot be suspended;
• Local factors such as emergency or loading doors, internal or external location, hot, warm, wet, cold or dry position and side wind;
• The materials that should be suspended (weight) and their equal distribution;
• Dynamic movements of the truss and rigging system;
• The available and/or required build-up and breakdown times; and
• The length of the hire period.

Each application should be accompanied by a drawing in *.dwg format (AutoCAD) which accurately marks the position of the materials to be suspended and the position of the Stand in the hall or other part of the Convention Centre.

All desired suspension points should be marked on the drawing concerned, together with the (height) measurements in (centi)metres, weights in kilograms, on a scale of 1:100.

When suspending objects supplied by the Client, the Supplier shall assume that they are fitted with the correct, safe suspension and/or attachment fittings. If the Supplier must also arrange for the assembly/dismantling of the hanging object, the Supplier will, if possible, carry this out after the Client has confirmed in writing or by e-mail that he agrees to the price quoted by the Supplier.

As regards the hanging and taking down of objects such as banners:

• the Client’s banners are not stored by the Supplier; storage can be arranged with third parties through the intermediary of RAI, in which case the costs of transport and storage will be borne by the Client;
• the banners supplied by the Client should be complete and pre-assembled; a banner is deemed to be complete only if it is fitted with an iron bar with the appropriate attachment points.

There is only limited scope for hanging objects at some locations owing to the design structure of some halls of the Convention Centre.

The Supplier reserves the right to refuse applications on the ground of the limitations of the roof structure of the hall or another part of the Convention Centre and/or for reasons of safety.

The Supplier will not be liable for direct or indirect damage arising as a result of incorrect information about or incorrect treatment of suspension points of an object belonging to the Client. Nor will the Supplier be liable for structures built by third parties for objects or for work carried out by the Client or third parties on the structure.

The applicable regulations under national and international legislation and standards apply to truss and rigging materials. The safety margin factor in the entertainment industry is 10, unlike the situation in manufacturing industry where the factor is 5.

If the Supplier rejects materials, this may result in the immediate discontinuation of the relevant work on the truss and rigging system.

Steel cables of 4 and 6 mm may be fitted only with self-locking Ver-lock termination grips consisting of specially designed wedge sockets with pin, in accordance with DIN 15315. The use of screwable U-shaped wire fasteners known as steel rope clamps is not permitted for hoisting equipment. Individual Ver-locks are obtainable. All other heavier hoisting equipment and loads should at least be fitted with wire rope slings having a diameter of 10 or 12 mm and Talurit pressed ferrules.

If third parties carry out the rigging work with the consent of the Supplier, the Supplier will always provide the desired suspension points. An accurate drawing of the truss and rigging system showing the point loads, dimensions in metres and scale 1:100, preferably in *.dwg format (AutoCAD), should have been received by the Supplier for assessment no later than 28 days before the first day of the relevant Event.

MTD (in this part C to be referred to as the Supplier) has been exclusively appointed by RAI to provide water supply and drainage, gas and compressed air in the Convention Centre.

Stand installations should comply with the regulations of RAI and all relevant authorities, including the Amsterdam Energy Company, the Municipal Water Company, the Fire Service and insurers. Installations that do not meet the requirements of the above authorities will not be connected.

The Client shall turn off the stopcock of the water supply each day when leaving the Stand.

The Supplier is not liable for defects which are a consequence of insufficient maintenance by the Client, changes made without the written consent of the Supplier or repairs made by the Client or for normal wear and tear for which the Client is liable.

In order to be able to invoke any right of repair, the Client must:

• immediately inform the Supplier in writing of any defects discovered;
• prove that a defects is attributable lack of quality or defective installation by the Supplier;
• cooperate fully with the Supplier in order to enable it to repair the defects within a reasonable period.

If, in the opinion of the Supplier, the costs of repair are not in proportion to the Client’s interest to have the Product repaired, the Client will be entitled to fair and reasonable compensation.

Within the Convention Centre, only RAI may supply food and beverages. The Client, nor any of its invitees, are not permitted to bring his own food and beverages into the Convention Centre or to have them delivered to the Convention Centre by third parties.

Unless agreed otherwise, RAI will deliver the first order of non-food and non-fresh articles on the last build-up day of the Event. Lunch items will be delivered between 11:00 AM and 1.00 PM.

Drink or food orders can be cancelled free of charge up to 48 hours before scheduled delivery. After that moment, cancellations of food items by the Client will be charged in full.

Drink and food items can be ordered before or during the Event by using the webshop. During the Event, drinks may be ordered two hours before desired delivery. Food items can be ordered no later than 24 hours before desired delivery, with the exception of sandwiches. Sandwiches must be ordered at least 48 hours before desired delivery.

Unopened packs, crates or boxes of beverages may be returned to RAI until not later than 2 hours before the end of the Event. In such a case a handling fee of 50% of the agreed price will be charged.

All payments, with the exception of food and beverage orders during the Event, should be made in accordance with article 20.1.

Payment for food and beverage orders placed during the Event must, contrary to article 20.3, be made immediately by means of a credit card bij the Client.

The Client must remove (or cause to be removed) waste that accrues during the build-up period, the Event and the breakdown period in accordance with RAI’s guidelines

Only the containers and waste bags made available by RAI may be used for the removal of waste. Containers and waste bags not supplied by RAI are not permitted in or around the Convention Centre and will not be removed.

All waste should be placed next to the Stand each day immediately after the Event closes. In so far as refuse is left at the Stand, the costs of removal will be charged to the Client.

If changes are made to the Stand or there is another relevant change after the conclusion of a Contract, the Client shall notify RAI in time of this required change in writing. If a change is notified later than 6 working days before the build-up of the Event, this may affect, for example, the timely and correct delivery and/or installation of the Stand. For certain elements or specific products of the Stand, RAI will apply a different deadline for Client's notification of changes, as agreed by the parties in the relevant quotation. RAI is not liable for loss or damage as a consequence of a failure by the Client to notify changes to the Stand or its location and/or a failure to notify them completely, correctly or in time.

The Client may cancel all or part of a Stand free of charge up to three (3) weeks prior to the first construction day of the Event. If the Client cancels all or part of a Stand within three (3) weeks prior to the first construction day of the Event, the Client shall owe a cancellation fee of 50% of the agreed price as stated in the invoice. For Cancellation of the Stand as of the 6th working day prior to the first construction day of an Event, Client shall owe 100% of the agreed price as included in the invoice.

The Client is entitled to start using the Stand once RAI has confirmed completion.

The Client must inspect (or have inspected by another party) the Stand after completion and before the opening of the Event. Any complaints should be immediately notified to RAI at the time of the inspection.

In the event of a complaint, RAI will endeavour to provide a suitable solution as quickly as possible, after which a further inspection will take place. Any complaints after the Event, without notification before or during the Event are not valid for any credit application.

A Stand will be deemed to have been accepted if no complaints are filed before the opening of the Event. The completion periods included in the Agredo not constitute vital deadlines.

Stands constructed by RAI may be rented by Clients.

Client will be obliged to return the Stand to RAI immediately after the close of the Event in the same condition in which he received it on the date of completion.

Rented Stands will remain the property of RAI, as will the copyright in the design and in the photographs, drafts, drawings and so forth made by way of preparation, in so far as not provided otherwise in the quotation.

Transfer of ownership of Stands purchased from RAI by Client shall take place at and by delivery if Client has paid the full amount, without prejudice to the provisions of article 35.5.

If ownership of the Stand is to be transferred to the Client, RAI will retain title to it until the entire amount owed under the Agreement has been paid by Client; in that case the ownership will pass after the last payment. As long as ownership of the Stand has not passed to the Client, he is not entitled to pledge the Stand or parts thereof or grant any other right in respect thereof to third parties.

The Stand will be at the expense and risk of the Client after completion and until it is returned by the Client to RAI.

The Client is responsible for ensuring that RAI obtains timely access to the locations and facilities that are necessary for the performance of the Contract. If the Event or Client’s participation is cancelled, the Client will be obliged to reimburse RAI for any and all costs incurred by RAI.

If goods used by the RAI for or in the Stand go missing or are stolen, lost or damaged the Client is obliged to notify RAI in writing or by email as quickly as possible but in any event no later than 12 hours after the discovery thereof or report this to RAI's service desk by preparing a report. The Client is obliged to reimburse the loss or damage in full, irrespective of the cause thereof.

The amount of the compensation will be the actual loss or damage suffered by RAI based on the replacement value, without prejudice to any further liability of the Client for loss or damage suffered by RAI on account of the failure to return the Stand properly or in time.

Any goods belonging to the Client which are to be used in designing the Stand should be made available by the Client to RAI at the specified location. Transport will be arranged by RAI only to the extent explicitly agreed. All costs shall be borne by the Client.

The Client will be liable for any loss or damage suffered by RAI as a result of failure to comply properly or in time with the obligation to make the goods referred to in article 37.1 available to the Supplier, regardless of the cause of the failure to comply or failure to comply properly or in time.

All risks pertaining to goods belonging to the Client shall remain with Client during the time they are in the Convention Centre, as well as during transport, loading and unloading. RAI will have no liability if Client’s goods go missing or are stolen, lost or damaged, unless this is due to intent or gross negligence on the part of RAI.

Any purchase by the Client of full color prints on tendon cloth shall be deemed to be a product for sale. If they are not taken away after the end of the Event by Client, these goods will be recycled or destroyed by RAI. Any costs may be passed on to the Client.

The Client will also indemnify RAI for any liability to reimburse third parties for loss or damage suffered as a consequence of such a defect in his goods.

RAI will not be liable for loss or damage suffered by the Client and/or third parties in respect to the construction, delivery, or defects in the Stand unless such is the result of intent or gross negligence on the part of RAI.

Any liability of RAI as a consequence of any technical malfunction, power failure, database inaccessibility or injudicious use or misuse by the Client is excluded.

As security for RAI’s payment obligations under the Agreement, RAI shall have a lien on all Client's goods used in the design or execution of the work/Stand or exhibited therein, thereon, or therewith.

The prices of Stand construction include:

• Organisational costs;
• Build-up and breakdown costs;
• Cleaning of the Stand before the opening and daily cleaning during the Event;
• The presence of a project manager during build-up and breakdown in the Convention Centre;
• Transport costs.

The prices of Stand construction exclude:

• The costs of build-up and breakdown between 10:00 PM and 6:00 AM or at weekends;
• The removal of exhibitors’ waste and cleaning of the area;
• Damage to panels, walls, furniture etc.; the resulting costs will be charged retrospectively.

Agreements regarding the transfer of intellectual property rights by RAI to Client or third parties shall only be agreed between the parties in writing or by email. Client is aware that RAI cannot transfer any intellectual property rights to which it is not entitled.

To the extent that Client opts for Design & Build regarding Stand Construction, under no circumstances shall any intellectual property on the Stand transfer from RAI to Client. All intellectual property rights to the design/implementation of the Stand shall vest exclusively in RAI.

Client will indemnify RAI against claims from third parties in respect of the use of intellectual property by the Client.

Within the Convention Centre, only RAI may supply internet access. Internet access is a facility or service that provides connectivity for a computer, a computer network, or other network device to the internet. The Client nor any of its invitees is permitted to bring their own internet service provider or internet access into the Convention Centre or have this delivered by third parties.

The paid RAI Wifi service is offered in the following forms:

1. Customization: an exclusive Wifi network is installed for the Client. The service is paid retrospectively, after the Event, and delivered exclusively to the Client via an exclusive W-Lan Network;
2. Premium: The service is only available via the 5 Ghz frequency. The service is paid for prior to delivery and is exclusively delivered to the Client via an exclusive W-Lan Network;

The applicable service descriptions for the RAI Wifi services are displayed online in the Webshop.

In addition to the Webshop, the Premium RAI Wifi service in the Convention Centre is also offered in a portal that is accessible via a Connection. These Terms and Conditions do not apply to the purchase of the Premium RAI Wifi service via the relevant portal.

RAI may unilaterally change the technical properties of the RAI Wifi service, also during the Usage Period. A unilateral change will not lead to a material deterioration of the functionality of the RAI Wifi service. In the event of a change, RAI will adjust and publish the applicable service description(s).

RAI may unilaterally adjust the composition of the RAI Wifi service or discontinue it entirely without further notice if RAI considers this necessary to be able to comply with applicable legislation. The adjustment or discontinuation will be announced on the RAI website.

RAI does not guarantee that the Client will always be able to use the RAI Wifi service undisturbed or that the service always has a minimum quality level. For example, RAI cannot guarantee that the Client can always set up a VPN connection to the Client's own business network via the RAI Wifi service.

The Customized RAI Wifi service is delivered by RAI to the Client by providing the Login Codes. The Client will perform an acceptance test within 48 hours of receipt of the Login Codes. The test is successful if the Client successfully accesses the RAI Wifi service via a Connection after entering the Login Codes in his Mobile Device. In the event of a successful test, upon expiry of the 48 hours without further notice to RAI or in the case of production use of the service by the Client, the RAI Wifi service is deemed to have been accepted by the Client.

If an acceptance test is not successful, RAI will check the Connection and possibly reinstall the exclusive WiFi network for the Client. After reinstalment, RAI will deliver the Customized RAI Wifi service to the Client for a second time. If the acceptance test is not successful even after renewed delivery, the Client may terminate the Agreement for the Customized RAI Wifi service free of charge. The dissolution takes place no later than before the start of the Event.

The Client is obliged to use the RAI Wifi service in accordance with these Conditions.

The Client may only set up and use a Connection in combination with a Mobile Device that meets the applicable legal requirements for that Mobile Device. The consequences of the use of a Mobile Device that does not meet these requirements are at the expense and risk of the Client. Mobile Devices can differ in functionalities, which can have consequences for the usability and quality of the RAI Wifi service.

Client is responsible for the correct installation and configuration of the WiFi network functions in its Mobile Device. RAI does not guarantee that Wifi Access Points are always compatible with Client's Mobile Device.

Client will receive Login codes after payment for the RAI Wifi service. The Login codes provide access to the RAI Wifi service. The Client is obliged to keep these Login codes confidential and is liable for all use of the RAI Wifi service that is made with its Login codes. Only in the event Client purchases the Customized RAI Wifi service, the Client may provide Login codes to third parties (for example to stand visitors).

In case of an hourly Usage Period, clock hours apply from the moment the Login code is entered. With a Usage Period per day, the Usage Period is the time between midnight and midnight (24 hours in total). If the Login code is entered during the day, the Usage Period will expire per day at midnight.

Client may not misuse the RAI Wifi service. Misuse is in any case, but is not limited to:

1. Selling or renting Login codes;
2. Causing disruptions in or overloading the RAI Wifi service and/or the IP network of RAI and the Supplier or any other form of nuisance that restricts the use of the RAI Wifi service or the IP networks mentioned;
3. The use of the RAI Wifi service to send unsolicited advertising messages via email or to send messages that can necessarily lead to a large number of responses (teasing or trolling) and therefore have a major influence on the availability of the RAI Wifi service and the IP network of the RAI and the Supplier;
4. Using the RAI Wifi service to pass on information that is prohibited, illegal or illegal, is contrary to public order or morality or that infringes the rights of third parties, in particular intellectual property rights and privacy rights.

If traffic on the IP network of RAI or the Supplier is hindered by the use of the Client of the RAI Wifi service, the Client must follow the instructions of RAI aimed at removing that nuisance. RAI may suspend the provision of the RAI Wifi service to the Client without prior notice in the event of nuisance. If RAI or the Supplier suffers damage due to the nuisance, the Client is obliged to compensate RAI for that damage.

RAI may block, suspend or terminate the Client's access to the RAI Wifi service at any time in the following cases:

1. Violation of these Terms and Conditions by the Client;
2. Actions that could lead to RAI's liability;
3. Violation of applicable laws and regulations.

The Client must secure the Connection itself, for example by using a VPN connection. Without security applied by the Client, data traffic between the Mobile Device and the Wifi Access Point is exchanged unencrypted. RAI is not liable for the harmful consequences of any tapped unencrypted data traffic over a Connection.

RAI may filter or block IP traffic originating from a Connection by type or type of traffic (e.g. port 25 traffic) if this is necessary at RAI's discretion to ensure the stability and / or security of the RAI Wifi service, the IP network of RAI and / or the Supplier's IP network.

The Service uses a wireless network technology. The possibilities to establish a Connection and the quality and properties thereof will therefore not always and everywhere be good (equally) within the Convention Centre. The differences are related to, among other things, the Mobile Device used, the radio coverage of the Wifi Access Point, overloaded radio frequency bands, the amount of electronic communication traffic, etc.

RAI makes every effort to ensure that the provision of the RAI Wifi service runs as smoothly as possible. However, it is technically impossible to prevent any disruption or restriction of the provision of the RAI Wifi service.

Wifi Access Points are maintained by or on behalf of RAI. RAI can temporarily take a Wifi Access Point out of use for maintenance purposes. RAI will keep this to a minimum and, where possible, perform this outside the opening hours of the Convention Centre.

Faults will be investigated by or on behalf of RAI as soon as possible after they have been made known to RAI and resolved to the best of its ability. The costs of malfunction investigation and repair will be borne by RAI. These costs can be charged to the Client if the investigation shows that the cause of the malfunction is in the Mobile Device that is used or is the result of an action by the Client in contravention of these Conditions.

When performing the RAI Wifi service, RAI processes personal data in accordance with its privacy statement and applicable privacy legislation, such as the General Data Protection Regulation, the GDPR Implementation Act and the Telecommunications Act. RAI's privacy statement is published on the RAI website.

The Client indemnifies RAI against claims from third parties for compensation for damage that has arisen as a result of the Client's use of the RAI Wifi service.